GitLab is used only for code review, issue tracking and project management. Canonical locations for source code are still https://gitweb.torproject.org/ https://git.torproject.org/ and git-rw.torproject.org.

Commit 0a4bc8fe authored by Mike Perry's avatar Mike Perry Committed by George Kadianakis

Bug 30992: Track a padding machine ctr to reduce race issues.

This tracking of the instantiation count should eliminate race conditions due
to starting and stopping machines rapidly. Now, we should no longer obey
STOP commands for previous machines.
parent 9eb0eeb6
......@@ -238,6 +238,12 @@ struct circuit_t {
* Each element of this array corresponds to a different padding machine,
* and we can have up to CIRCPAD_MAX_MACHINES such machines. */
struct circpad_machine_runtime_t *padding_info[CIRCPAD_MAX_MACHINES];
/** padding_machine_ctr increments each time a new padding machine
* is negotiated. It is used for shutdown conditions, to ensure
* that STOP commands actually correspond to the current machine,
* and not a previous one. */
uint32_t padding_machine_ctr;
};
#endif /* !defined(CIRCUIT_ST_H) */
......@@ -266,18 +266,31 @@ circpad_marked_circuit_for_padding(circuit_t *circ, int reason)
/**
* Free all the machineinfos in <b>circ</b> that match <b>machine_num</b>.
*
* If machine_ctr is non-zero, also make sure it matches the padding_info's
* machine counter before freeing.
*
* Returns true if any machineinfos with that number were freed.
* False otherwise. */
static int
free_circ_machineinfos_with_machine_num(circuit_t *circ, int machine_num)
free_circ_machineinfos_with_machine_num(circuit_t *circ, int machine_num,
uint32_t machine_ctr)
{
int found = 0;
FOR_EACH_CIRCUIT_MACHINE_BEGIN(i) {
if (circ->padding_machine[i] &&
circ->padding_machine[i]->machine_num == machine_num) {
circpad_circuit_machineinfo_free_idx(circ, i);
circ->padding_machine[i] = NULL;
found = 1;
/* If machine_ctr is non-zero, make sure it matches too. This
* is to ensure that old STOP messages don't shutdown newer machines. */
if (machine_ctr && circ->padding_info[i] &&
circ->padding_info[i]->machine_ctr != machine_ctr) {
log_info(LD_CIRC,
"Padding shutdown for wrong (old?) machine ctr: %u vs %u",
machine_ctr, circ->padding_info[i]->machine_ctr);
} else {
circpad_circuit_machineinfo_free_idx(circ, i);
circ->padding_machine[i] = NULL;
found = 1;
}
}
} FOR_EACH_CIRCUIT_MACHINE_END;
......@@ -306,6 +319,7 @@ circpad_circuit_machineinfo_new(circuit_t *on_circ, int machine_index)
mi->machine_index = machine_index;
mi->on_circ = on_circ;
mi->last_cell_time_sec = approx_time();
mi->machine_ctr = on_circ->padding_machine_ctr;
return mi;
}
......@@ -1556,19 +1570,23 @@ circpad_machine_spec_transitioned_to_end(circpad_machine_runtime_t *mi)
/* We free the machine info here so that we can be replaced
* by a different machine. But we must leave the padding_machine
* in place to wait for the negotiated response */
uint32_t machine_ctr = mi->machine_ctr;
circpad_circuit_machineinfo_free_idx(on_circ,
machine->machine_index);
circpad_negotiate_padding(TO_ORIGIN_CIRCUIT(on_circ),
machine->machine_num,
machine->target_hopnum,
CIRCPAD_COMMAND_STOP);
CIRCPAD_COMMAND_STOP,
machine_ctr);
} else {
uint32_t machine_ctr = mi->machine_ctr;
circpad_circuit_machineinfo_free_idx(on_circ,
machine->machine_index);
circpad_padding_negotiated(on_circ,
machine->machine_num,
CIRCPAD_COMMAND_STOP,
CIRCPAD_RESPONSE_OK);
CIRCPAD_RESPONSE_OK,
machine_ctr);
on_circ->padding_machine[machine->machine_index] = NULL;
}
}
......@@ -2099,13 +2117,15 @@ circpad_shutdown_old_machines(origin_circuit_t *on_circ)
FOR_EACH_ACTIVE_CIRCUIT_MACHINE_BEGIN(i, circ) {
if (!circpad_machine_conditions_met(on_circ,
circ->padding_machine[i])) {
uint32_t machine_ctr = circ->padding_info[i]->machine_ctr;
// Clear machineinfo (frees timers)
circpad_circuit_machineinfo_free_idx(circ, i);
// Send padding negotiate stop
circpad_negotiate_padding(on_circ,
circ->padding_machine[i]->machine_num,
circ->padding_machine[i]->target_hopnum,
CIRCPAD_COMMAND_STOP);
CIRCPAD_COMMAND_STOP,
machine_ctr);
}
} FOR_EACH_ACTIVE_CIRCUIT_MACHINE_END;
}
......@@ -2172,7 +2192,8 @@ circpad_add_matching_machines(origin_circuit_t *on_circ,
circpad_setup_machine_on_circ(circ, machine);
if (circpad_negotiate_padding(on_circ, machine->machine_num,
machine->target_hopnum,
CIRCPAD_COMMAND_START) < 0) {
CIRCPAD_COMMAND_START,
circ->padding_machine_ctr) < 0) {
log_info(LD_CIRC,
"Padding not negotiated. Cleaning machine from circuit %u",
CIRCUIT_IS_ORIGIN(circ) ?
......@@ -2463,6 +2484,17 @@ circpad_setup_machine_on_circ(circuit_t *on_circ,
machine->name, on_circ->purpose);
}
/* Padding machine ctr starts at 1, so we increment this ctr first.
* (machine ctr of 0 means "any machine").
*
* See https://bugs.tororject.org/30992. */
on_circ->padding_machine_ctr++;
/* uint32 wraparound check: 0 is special, just wrap to 1 */
if (on_circ->padding_machine_ctr == 0) {
on_circ->padding_machine_ctr = 1;
}
on_circ->padding_info[machine->machine_index] =
circpad_circuit_machineinfo_new(on_circ, machine->machine_index);
on_circ->padding_machine[machine->machine_index] = machine;
......@@ -2816,7 +2848,8 @@ signed_error_t
circpad_negotiate_padding(origin_circuit_t *circ,
circpad_machine_num_t machine,
uint8_t target_hopnum,
uint8_t command)
uint8_t command,
uint32_t machine_ctr)
{
circpad_negotiate_t type;
cell_t cell;
......@@ -2838,14 +2871,16 @@ circpad_negotiate_padding(origin_circuit_t *circ,
circpad_negotiate_set_command(&type, command);
circpad_negotiate_set_version(&type, 0);
circpad_negotiate_set_machine_type(&type, machine);
circpad_negotiate_set_machine_ctr(&type, machine_ctr);
if ((len = circpad_negotiate_encode(cell.payload, CELL_PAYLOAD_SIZE,
&type)) < 0)
return -1;
log_fn(LOG_INFO,LD_CIRC,
"Negotiating padding on circuit %u (%d), command %d",
circ->global_identifier, TO_CIRCUIT(circ)->purpose, command);
"Negotiating padding on circuit %u (%d), command %d, for ctr %u",
circ->global_identifier, TO_CIRCUIT(circ)->purpose, command,
machine_ctr);
return circpad_send_command_to_hop(circ, target_hopnum,
RELAY_COMMAND_PADDING_NEGOTIATE,
......@@ -2861,7 +2896,8 @@ bool
circpad_padding_negotiated(circuit_t *circ,
circpad_machine_num_t machine,
uint8_t command,
uint8_t response)
uint8_t response,
uint32_t machine_ctr)
{
circpad_negotiated_t type;
cell_t cell;
......@@ -2878,6 +2914,7 @@ circpad_padding_negotiated(circuit_t *circ,
circpad_negotiated_set_response(&type, response);
circpad_negotiated_set_version(&type, 0);
circpad_negotiated_set_machine_type(&type, machine);
circpad_negotiated_set_machine_ctr(&type, machine_ctr);
if ((len = circpad_negotiated_encode(cell.payload, CELL_PAYLOAD_SIZE,
&type)) < 0)
......@@ -2923,19 +2960,33 @@ circpad_handle_padding_negotiate(circuit_t *circ, cell_t *cell)
if (negotiate->command == CIRCPAD_COMMAND_STOP) {
/* Free the machine corresponding to this machine type */
if (free_circ_machineinfos_with_machine_num(circ,
negotiate->machine_type)) {
log_info(LD_CIRC, "Received STOP command for machine %u",
negotiate->machine_type);
negotiate->machine_type,
negotiate->machine_ctr)) {
log_info(LD_CIRC, "Received STOP command for machine %u, ctr %u",
negotiate->machine_type, negotiate->machine_ctr);
goto done;
}
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Received circuit padding stop command for unknown machine.");
goto err;
} else if (negotiate->command == CIRCPAD_COMMAND_START) {
if (negotiate->machine_ctr <= circ->padding_machine_ctr) {
log_info(LD_CIRC, "Received STOP command for old machine %u, ctr %u",
negotiate->machine_type, negotiate->machine_ctr);
goto done;
} else {
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Received circuit padding stop command for unknown machine.");
goto err;
}
} else if (negotiate->command == CIRCPAD_COMMAND_START) {
SMARTLIST_FOREACH_BEGIN(relay_padding_machines,
const circpad_machine_spec_t *, m) {
if (m->machine_num == negotiate->machine_type) {
circpad_setup_machine_on_circ(circ, m);
if (negotiate->machine_ctr &&
circ->padding_machine_ctr != negotiate->machine_ctr) {
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Client and relay have different counts for padding machines: "
"%u vs %u", circ->padding_machine_ctr, negotiate->machine_ctr);
}
circpad_cell_event_nonpadding_received(circ);
goto done;
}
......@@ -2948,7 +2999,8 @@ circpad_handle_padding_negotiate(circuit_t *circ, cell_t *cell)
done:
circpad_padding_negotiated(circ, negotiate->machine_type,
negotiate->command,
(retval == 0) ? CIRCPAD_RESPONSE_OK : CIRCPAD_RESPONSE_ERR);
(retval == 0) ? CIRCPAD_RESPONSE_OK : CIRCPAD_RESPONSE_ERR,
negotiate->machine_ctr);
circpad_negotiate_free(negotiate);
return retval;
......@@ -2999,17 +3051,22 @@ circpad_handle_padding_negotiated(circuit_t *circ, cell_t *cell,
* circpad_add_matching_matchines() added a new machine,
* there may be a padding_machine for a different machine num
* than this response. */
free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type);
free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type,
negotiated->machine_ctr);
} else if (negotiated->command == CIRCPAD_COMMAND_START &&
negotiated->response == CIRCPAD_RESPONSE_ERR) {
// This can happen due to consensus drift.. free the machines
// This can still happen due to consensus drift.. free the machines
// and be sad
free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type);
TO_ORIGIN_CIRCUIT(circ)->padding_negotiation_failed = 1;
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Middle node did not accept our padding request on circuit %u (%d)",
TO_ORIGIN_CIRCUIT(circ)->global_identifier,
circ->purpose);
if (free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type,
negotiated->machine_ctr)) {
// Only fail if a machine was there and matched the error cell
TO_ORIGIN_CIRCUIT(circ)->padding_negotiation_failed = 1;
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Middle node did not accept our padding request on circuit "
"%u (%d)",
TO_ORIGIN_CIRCUIT(circ)->global_identifier,
circ->purpose);
}
}
circpad_negotiated_free(negotiated);
......
......@@ -565,6 +565,13 @@ typedef struct circpad_machine_runtime_t {
/** What state is this machine in? */
circpad_statenum_t current_state;
/** Machine counter, for shutdown sync.
*
* Set from circuit_t.padding_machine_ctr, which is incremented each
* padding machine instantiation.
*/
uint32_t machine_ctr;
/**
* True if we have scheduled a timer for padding.
*
......@@ -726,11 +733,13 @@ signed_error_t circpad_handle_padding_negotiated(struct circuit_t *circ,
signed_error_t circpad_negotiate_padding(struct origin_circuit_t *circ,
circpad_machine_num_t machine,
uint8_t target_hopnum,
uint8_t command);
uint8_t command,
uint32_t machine_ctr);
bool circpad_padding_negotiated(struct circuit_t *circ,
circpad_machine_num_t machine,
uint8_t command,
uint8_t response);
uint8_t response,
uint32_t machine_ctr);
circpad_purpose_mask_t circpad_circ_purpose_to_mask(uint8_t circ_purpose);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment