GitLab is used only for code review, issue tracking and project management. Canonical locations for source code are still https://gitweb.torproject.org/ https://git.torproject.org/ and git-rw.torproject.org.

Commit 1797d051 authored by George Kadianakis's avatar George Kadianakis
Browse files

Merge branch 'tor-github/pr/1925'

parents 1e230bd4 963c3591
o Minor bugfixes (circuitpadding):
- Add a per-circuit padding machine instance counter, so we can
differentiate between shutdown requests for old machines on a circuit;
Fixes bug 30992; bugfix on 0.4.1.1-alpha.
......@@ -238,6 +238,12 @@ struct circuit_t {
* Each element of this array corresponds to a different padding machine,
* and we can have up to CIRCPAD_MAX_MACHINES such machines. */
struct circpad_machine_runtime_t *padding_info[CIRCPAD_MAX_MACHINES];
/** padding_machine_ctr increments each time a new padding machine
* is negotiated. It is used for shutdown conditions, to ensure
* that STOP commands actually correspond to the current machine,
* and not a previous one. */
uint32_t padding_machine_ctr;
};
#endif /* !defined(CIRCUIT_ST_H) */
......@@ -266,18 +266,31 @@ circpad_marked_circuit_for_padding(circuit_t *circ, int reason)
/**
* Free all the machineinfos in <b>circ</b> that match <b>machine_num</b>.
*
* If machine_ctr is non-zero, also make sure it matches the padding_info's
* machine counter before freeing.
*
* Returns true if any machineinfos with that number were freed.
* False otherwise. */
static int
free_circ_machineinfos_with_machine_num(circuit_t *circ, int machine_num)
free_circ_machineinfos_with_machine_num(circuit_t *circ, int machine_num,
uint32_t machine_ctr)
{
int found = 0;
FOR_EACH_CIRCUIT_MACHINE_BEGIN(i) {
if (circ->padding_machine[i] &&
circ->padding_machine[i]->machine_num == machine_num) {
circpad_circuit_machineinfo_free_idx(circ, i);
circ->padding_machine[i] = NULL;
found = 1;
/* If machine_ctr is non-zero, make sure it matches too. This
* is to ensure that old STOP messages don't shutdown newer machines. */
if (machine_ctr && circ->padding_info[i] &&
circ->padding_info[i]->machine_ctr != machine_ctr) {
log_info(LD_CIRC,
"Padding shutdown for wrong (old?) machine ctr: %u vs %u",
machine_ctr, circ->padding_info[i]->machine_ctr);
} else {
circpad_circuit_machineinfo_free_idx(circ, i);
circ->padding_machine[i] = NULL;
found = 1;
}
}
} FOR_EACH_CIRCUIT_MACHINE_END;
......@@ -306,6 +319,7 @@ circpad_circuit_machineinfo_new(circuit_t *on_circ, int machine_index)
mi->machine_index = machine_index;
mi->on_circ = on_circ;
mi->last_cell_time_sec = approx_time();
mi->machine_ctr = on_circ->padding_machine_ctr;
return mi;
}
......@@ -1556,19 +1570,23 @@ circpad_machine_spec_transitioned_to_end(circpad_machine_runtime_t *mi)
/* We free the machine info here so that we can be replaced
* by a different machine. But we must leave the padding_machine
* in place to wait for the negotiated response */
uint32_t machine_ctr = mi->machine_ctr;
circpad_circuit_machineinfo_free_idx(on_circ,
machine->machine_index);
circpad_negotiate_padding(TO_ORIGIN_CIRCUIT(on_circ),
machine->machine_num,
machine->target_hopnum,
CIRCPAD_COMMAND_STOP);
CIRCPAD_COMMAND_STOP,
machine_ctr);
} else {
uint32_t machine_ctr = mi->machine_ctr;
circpad_circuit_machineinfo_free_idx(on_circ,
machine->machine_index);
circpad_padding_negotiated(on_circ,
machine->machine_num,
CIRCPAD_COMMAND_STOP,
CIRCPAD_RESPONSE_OK);
CIRCPAD_RESPONSE_OK,
machine_ctr);
on_circ->padding_machine[machine->machine_index] = NULL;
}
}
......@@ -2099,13 +2117,15 @@ circpad_shutdown_old_machines(origin_circuit_t *on_circ)
FOR_EACH_ACTIVE_CIRCUIT_MACHINE_BEGIN(i, circ) {
if (!circpad_machine_conditions_met(on_circ,
circ->padding_machine[i])) {
uint32_t machine_ctr = circ->padding_info[i]->machine_ctr;
// Clear machineinfo (frees timers)
circpad_circuit_machineinfo_free_idx(circ, i);
// Send padding negotiate stop
circpad_negotiate_padding(on_circ,
circ->padding_machine[i]->machine_num,
circ->padding_machine[i]->target_hopnum,
CIRCPAD_COMMAND_STOP);
CIRCPAD_COMMAND_STOP,
machine_ctr);
}
} FOR_EACH_ACTIVE_CIRCUIT_MACHINE_END;
}
......@@ -2172,7 +2192,8 @@ circpad_add_matching_machines(origin_circuit_t *on_circ,
circpad_setup_machine_on_circ(circ, machine);
if (circpad_negotiate_padding(on_circ, machine->machine_num,
machine->target_hopnum,
CIRCPAD_COMMAND_START) < 0) {
CIRCPAD_COMMAND_START,
circ->padding_machine_ctr) < 0) {
log_info(LD_CIRC,
"Padding not negotiated. Cleaning machine from circuit %u",
CIRCUIT_IS_ORIGIN(circ) ?
......@@ -2463,6 +2484,17 @@ circpad_setup_machine_on_circ(circuit_t *on_circ,
machine->name, on_circ->purpose);
}
/* Padding machine ctr starts at 1, so we increment this ctr first.
* (machine ctr of 0 means "any machine").
*
* See https://bugs.tororject.org/30992. */
on_circ->padding_machine_ctr++;
/* uint32 wraparound check: 0 is special, just wrap to 1 */
if (on_circ->padding_machine_ctr == 0) {
on_circ->padding_machine_ctr = 1;
}
on_circ->padding_info[machine->machine_index] =
circpad_circuit_machineinfo_new(on_circ, machine->machine_index);
on_circ->padding_machine[machine->machine_index] = machine;
......@@ -2816,7 +2848,8 @@ signed_error_t
circpad_negotiate_padding(origin_circuit_t *circ,
circpad_machine_num_t machine,
uint8_t target_hopnum,
uint8_t command)
uint8_t command,
uint32_t machine_ctr)
{
circpad_negotiate_t type;
cell_t cell;
......@@ -2838,14 +2871,16 @@ circpad_negotiate_padding(origin_circuit_t *circ,
circpad_negotiate_set_command(&type, command);
circpad_negotiate_set_version(&type, 0);
circpad_negotiate_set_machine_type(&type, machine);
circpad_negotiate_set_machine_ctr(&type, machine_ctr);
if ((len = circpad_negotiate_encode(cell.payload, CELL_PAYLOAD_SIZE,
&type)) < 0)
return -1;
log_fn(LOG_INFO,LD_CIRC,
"Negotiating padding on circuit %u (%d), command %d",
circ->global_identifier, TO_CIRCUIT(circ)->purpose, command);
"Negotiating padding on circuit %u (%d), command %d, for ctr %u",
circ->global_identifier, TO_CIRCUIT(circ)->purpose, command,
machine_ctr);
return circpad_send_command_to_hop(circ, target_hopnum,
RELAY_COMMAND_PADDING_NEGOTIATE,
......@@ -2861,7 +2896,8 @@ bool
circpad_padding_negotiated(circuit_t *circ,
circpad_machine_num_t machine,
uint8_t command,
uint8_t response)
uint8_t response,
uint32_t machine_ctr)
{
circpad_negotiated_t type;
cell_t cell;
......@@ -2878,6 +2914,7 @@ circpad_padding_negotiated(circuit_t *circ,
circpad_negotiated_set_response(&type, response);
circpad_negotiated_set_version(&type, 0);
circpad_negotiated_set_machine_type(&type, machine);
circpad_negotiated_set_machine_ctr(&type, machine_ctr);
if ((len = circpad_negotiated_encode(cell.payload, CELL_PAYLOAD_SIZE,
&type)) < 0)
......@@ -2923,19 +2960,33 @@ circpad_handle_padding_negotiate(circuit_t *circ, cell_t *cell)
if (negotiate->command == CIRCPAD_COMMAND_STOP) {
/* Free the machine corresponding to this machine type */
if (free_circ_machineinfos_with_machine_num(circ,
negotiate->machine_type)) {
log_info(LD_CIRC, "Received STOP command for machine %u",
negotiate->machine_type);
negotiate->machine_type,
negotiate->machine_ctr)) {
log_info(LD_CIRC, "Received STOP command for machine %u, ctr %u",
negotiate->machine_type, negotiate->machine_ctr);
goto done;
}
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Received circuit padding stop command for unknown machine.");
goto err;
} else if (negotiate->command == CIRCPAD_COMMAND_START) {
if (negotiate->machine_ctr <= circ->padding_machine_ctr) {
log_info(LD_CIRC, "Received STOP command for old machine %u, ctr %u",
negotiate->machine_type, negotiate->machine_ctr);
goto done;
} else {
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Received circuit padding stop command for unknown machine.");
goto err;
}
} else if (negotiate->command == CIRCPAD_COMMAND_START) {
SMARTLIST_FOREACH_BEGIN(relay_padding_machines,
const circpad_machine_spec_t *, m) {
if (m->machine_num == negotiate->machine_type) {
circpad_setup_machine_on_circ(circ, m);
if (negotiate->machine_ctr &&
circ->padding_machine_ctr != negotiate->machine_ctr) {
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Client and relay have different counts for padding machines: "
"%u vs %u", circ->padding_machine_ctr, negotiate->machine_ctr);
}
circpad_cell_event_nonpadding_received(circ);
goto done;
}
......@@ -2948,7 +2999,8 @@ circpad_handle_padding_negotiate(circuit_t *circ, cell_t *cell)
done:
circpad_padding_negotiated(circ, negotiate->machine_type,
negotiate->command,
(retval == 0) ? CIRCPAD_RESPONSE_OK : CIRCPAD_RESPONSE_ERR);
(retval == 0) ? CIRCPAD_RESPONSE_OK : CIRCPAD_RESPONSE_ERR,
negotiate->machine_ctr);
circpad_negotiate_free(negotiate);
return retval;
......@@ -2999,17 +3051,22 @@ circpad_handle_padding_negotiated(circuit_t *circ, cell_t *cell,
* circpad_add_matching_matchines() added a new machine,
* there may be a padding_machine for a different machine num
* than this response. */
free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type);
free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type,
negotiated->machine_ctr);
} else if (negotiated->command == CIRCPAD_COMMAND_START &&
negotiated->response == CIRCPAD_RESPONSE_ERR) {
// This can happen due to consensus drift.. free the machines
// This can still happen due to consensus drift.. free the machines
// and be sad
free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type);
TO_ORIGIN_CIRCUIT(circ)->padding_negotiation_failed = 1;
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Middle node did not accept our padding request on circuit %u (%d)",
TO_ORIGIN_CIRCUIT(circ)->global_identifier,
circ->purpose);
if (free_circ_machineinfos_with_machine_num(circ, negotiated->machine_type,
negotiated->machine_ctr)) {
// Only fail if a machine was there and matched the error cell
TO_ORIGIN_CIRCUIT(circ)->padding_negotiation_failed = 1;
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"Middle node did not accept our padding request on circuit "
"%u (%d)",
TO_ORIGIN_CIRCUIT(circ)->global_identifier,
circ->purpose);
}
}
circpad_negotiated_free(negotiated);
......
......@@ -565,6 +565,13 @@ typedef struct circpad_machine_runtime_t {
/** What state is this machine in? */
circpad_statenum_t current_state;
/** Machine counter, for shutdown sync.
*
* Set from circuit_t.padding_machine_ctr, which is incremented each
* padding machine instantiation.
*/
uint32_t machine_ctr;
/**
* True if we have scheduled a timer for padding.
*
......@@ -726,11 +733,13 @@ signed_error_t circpad_handle_padding_negotiated(struct circuit_t *circ,
signed_error_t circpad_negotiate_padding(struct origin_circuit_t *circ,
circpad_machine_num_t machine,
uint8_t target_hopnum,
uint8_t command);
uint8_t command,
uint32_t machine_ctr);
bool circpad_padding_negotiated(struct circuit_t *circ,
circpad_machine_num_t machine,
uint8_t command,
uint8_t response);
uint8_t response,
uint32_t machine_ctr);
circpad_purpose_mask_t circpad_circ_purpose_to_mask(uint8_t circ_purpose);
......
......@@ -1361,7 +1361,7 @@ test_circuitpadding_wronghop(void *arg)
/* 5. Test that asking to stop the wrong machine does nothing */
circpad_negotiate_padding(TO_ORIGIN_CIRCUIT(client_side),
255, 2, CIRCPAD_COMMAND_STOP);
255, 2, CIRCPAD_COMMAND_STOP, 0);
tt_ptr_op(client_side->padding_machine[0], OP_NE, NULL);
tt_ptr_op(client_side->padding_info[0], OP_NE, NULL);
tt_ptr_op(relay_side->padding_machine[0], OP_NE, NULL);
......@@ -1409,7 +1409,7 @@ test_circuitpadding_wronghop(void *arg)
circpad_padding_negotiated(relay_side,
CIRCPAD_MACHINE_CIRC_SETUP,
CIRCPAD_COMMAND_START,
CIRCPAD_RESPONSE_OK);
CIRCPAD_RESPONSE_OK, 0);
/* verify no padding was negotiated */
tt_ptr_op(relay_side->padding_machine[0], OP_EQ, NULL);
......@@ -1418,7 +1418,7 @@ test_circuitpadding_wronghop(void *arg)
circpad_padding_negotiated(relay_side,
CIRCPAD_MACHINE_CIRC_SETUP,
CIRCPAD_COMMAND_START,
CIRCPAD_RESPONSE_ERR);
CIRCPAD_RESPONSE_ERR, 0);
/* verify no padding was negotiated */
tt_ptr_op(relay_side->padding_machine[0], OP_EQ, NULL);
......@@ -1521,7 +1521,7 @@ test_circuitpadding_negotiation(void *arg)
/* Force negotiate padding. */
circpad_negotiate_padding(TO_ORIGIN_CIRCUIT(client_side),
CIRCPAD_MACHINE_CIRC_SETUP,
2, CIRCPAD_COMMAND_START);
2, CIRCPAD_COMMAND_START, 0);
/* verify no padding was negotiated */
tt_ptr_op(relay_side->padding_machine[0], OP_EQ, NULL);
......
......@@ -112,6 +112,17 @@ circpad_negotiate_set_echo_request(circpad_negotiate_t *inp, uint8_t val)
inp->echo_request = val;
return 0;
}
uint32_t
circpad_negotiate_get_machine_ctr(const circpad_negotiate_t *inp)
{
return inp->machine_ctr;
}
int
circpad_negotiate_set_machine_ctr(circpad_negotiate_t *inp, uint32_t val)
{
inp->machine_ctr = val;
return 0;
}
const char *
circpad_negotiate_check(const circpad_negotiate_t *obj)
{
......@@ -148,6 +159,9 @@ circpad_negotiate_encoded_len(const circpad_negotiate_t *obj)
/* Length of u8 echo_request IN [0, 1] */
result += 1;
/* Length of u32 machine_ctr */
result += 4;
return result;
}
int
......@@ -203,6 +217,13 @@ circpad_negotiate_encode(uint8_t *output, const size_t avail, const circpad_nego
trunnel_set_uint8(ptr, (obj->echo_request));
written += 1; ptr += 1;
/* Encode u32 machine_ctr */
trunnel_assert(written <= avail);
if (avail - written < 4)
goto truncated;
trunnel_set_uint32(ptr, trunnel_htonl(obj->machine_ctr));
written += 4; ptr += 4;
trunnel_assert(ptr == output + written);
#ifdef TRUNNEL_CHECK_ENCODED_LEN
......@@ -263,6 +284,11 @@ circpad_negotiate_parse_into(circpad_negotiate_t *obj, const uint8_t *input, con
remaining -= 1; ptr += 1;
if (! (obj->echo_request == 0 || obj->echo_request == 1))
goto fail;
/* Parse u32 machine_ctr */
CHECK_REMAINING(4, truncated);
obj->machine_ctr = trunnel_ntohl(trunnel_get_uint32(ptr));
remaining -= 4; ptr += 4;
trunnel_assert(ptr + remaining == input + len_in);
return len_in - remaining;
......@@ -372,6 +398,17 @@ circpad_negotiated_set_machine_type(circpad_negotiated_t *inp, uint8_t val)
inp->machine_type = val;
return 0;
}
uint32_t
circpad_negotiated_get_machine_ctr(const circpad_negotiated_t *inp)
{
return inp->machine_ctr;
}
int
circpad_negotiated_set_machine_ctr(circpad_negotiated_t *inp, uint32_t val)
{
inp->machine_ctr = val;
return 0;
}
const char *
circpad_negotiated_check(const circpad_negotiated_t *obj)
{
......@@ -408,6 +445,9 @@ circpad_negotiated_encoded_len(const circpad_negotiated_t *obj)
/* Length of u8 machine_type */
result += 1;
/* Length of u32 machine_ctr */
result += 4;
return result;
}
int
......@@ -463,6 +503,13 @@ circpad_negotiated_encode(uint8_t *output, const size_t avail, const circpad_neg
trunnel_set_uint8(ptr, (obj->machine_type));
written += 1; ptr += 1;
/* Encode u32 machine_ctr */
trunnel_assert(written <= avail);
if (avail - written < 4)
goto truncated;
trunnel_set_uint32(ptr, trunnel_htonl(obj->machine_ctr));
written += 4; ptr += 4;
trunnel_assert(ptr == output + written);
#ifdef TRUNNEL_CHECK_ENCODED_LEN
......@@ -523,6 +570,11 @@ circpad_negotiated_parse_into(circpad_negotiated_t *obj, const uint8_t *input, c
CHECK_REMAINING(1, truncated);
obj->machine_type = (trunnel_get_uint8(ptr));
remaining -= 1; ptr += 1;
/* Parse u32 machine_ctr */
CHECK_REMAINING(4, truncated);
obj->machine_ctr = trunnel_ntohl(trunnel_get_uint32(ptr));
remaining -= 4; ptr += 4;
trunnel_assert(ptr + remaining == input + len_in);
return len_in - remaining;
......
......@@ -26,6 +26,7 @@ struct circpad_negotiate_st {
uint8_t machine_type;
/** If true, send a relay_drop reply.. */
uint8_t echo_request;
uint32_t machine_ctr;
uint8_t trunnel_error_code_;
};
#endif
......@@ -42,6 +43,14 @@ struct circpad_negotiated_st {
/** Machine type is left unbounded because we can specify
* new machines in the consensus */
uint8_t machine_type;
/**
* This field is used for shutdown synchronization. It is OK if
* it wraps, because all we need to do is make sure the STOP
* command is actually for the currently active machine.
* For backward-compatibility, though, 0 has special meaning
* (it means match any machine).
*/
uint32_t machine_ctr;
uint8_t trunnel_error_code_;
};
#endif
......@@ -118,6 +127,15 @@ uint8_t circpad_negotiate_get_echo_request(const circpad_negotiate_t *inp);
* code on 'inp' on failure.
*/
int circpad_negotiate_set_echo_request(circpad_negotiate_t *inp, uint8_t val);
/** Return the value of the machine_ctr field of the
* circpad_negotiate_t in 'inp'
*/
uint32_t circpad_negotiate_get_machine_ctr(const circpad_negotiate_t *inp);
/** Set the value of the machine_ctr field of the circpad_negotiate_t
* in 'inp' to 'val'. Return 0 on success; return -1 and set the error
* code on 'inp' on failure.
*/
int circpad_negotiate_set_machine_ctr(circpad_negotiate_t *inp, uint32_t val);
/** Return a newly allocated circpad_negotiated with all elements set
* to zero.
*/
......@@ -190,6 +208,15 @@ uint8_t circpad_negotiated_get_machine_type(const circpad_negotiated_t *inp);
* -1 and set the error code on 'inp' on failure.
*/
int circpad_negotiated_set_machine_type(circpad_negotiated_t *inp, uint8_t val);
/** Return the value of the machine_ctr field of the
* circpad_negotiated_t in 'inp'
*/
uint32_t circpad_negotiated_get_machine_ctr(const circpad_negotiated_t *inp);
/** Set the value of the machine_ctr field of the circpad_negotiated_t
* in 'inp' to 'val'. Return 0 on success; return -1 and set the error
* code on 'inp' on failure.
*/
int circpad_negotiated_set_machine_ctr(circpad_negotiated_t *inp, uint32_t val);
#endif
......@@ -27,6 +27,13 @@ struct circpad_negotiate {
// FIXME-MP-AP: Maybe we just say to transition to the first state
// here instead.. Also what about delay before responding?
u8 echo_request IN [0,1];
// This field is used for shutdown synchronization. It is OK if
// it wraps, because all we need to do is make sure the STOP
// command is actually for the currently active machine.
// For backward-compatibility, though, 0 has special meaning
// (it means match any machine).
u32 machine_ctr;
};
/**
......@@ -41,4 +48,14 @@ struct circpad_negotiated {
/** Machine type is left unbounded because we can specify
* new machines in the consensus */
u8 machine_type;
/**
* This field is used for shutdown synchronization. It is OK if
* it wraps, because all we need to do is make sure the STOP
* command is actually for the currently active machine.
* For backward-compatibility, though, 0 has special meaning
* (it means match any machine).
*/
u32 machine_ctr;
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment