Loading doc/tor.1.in +31 −3 Original line number Diff line number Diff line Loading @@ -89,11 +89,11 @@ Windows since that platform lacks getrlimit(). (Default: 1000) .TP \fBControlPort \fR\fIPort\fP If set, Tor will accept connections on this port, and allow those connections to control the Tor process using the this port (Usually: 9051), and allow those connections to control the Tor process using the Tor Control Protocol (described in control-spec.txt). Note: unless you also specify one of \fBHashedControlPassword\fP or \fBCookieAuthentication\fP, setting this option will cause Tor to allow any process on the local host to control it. control it. This option is required if you would like to use Tor with \fBdns-proxy-tor\fP. .LP .TP \fBControlListenAddress \fR\fIIP\fR[:\fIPORT\fR]\fP Loading Loading @@ -526,6 +526,13 @@ leaking DNS requests. When a controller asks for a virtual (unused) address with the 'MAPADDRESS' command, Tor picks an unassigned address from this range. (Default: 127.192.0.0/10) When using \fBdns-proxy-tor\fP to answer queries over a network you'll want to change this address to "10.192.0.0/10" or "172.16.0.0/12". The default \fBVirtualAddrNetwork \fR\fIAddress\fB address range on a properly configured machine will route to the loopback interface. For local use \fBdns-proxy-tor\fP doesn't require a change to the default \fBVirtualAddrNetwork \fR\fIAddress\fB setting. .LP .TP \fBAllowNonRFC953Hostnames \fR\fB0\fR|\fB1\fR\fP Loading @@ -542,7 +549,28 @@ safe since we have already used TLS to authenticate the server and to establish forward-secure keys. Turning this option off makes circuit building slower. (Default: 1) .LP .TP \fBTransPort\fP \fR\fIPORT\fP Enable transparent proxy support on \fR\fIPORT\fP (Usually: 9040). This is required to enable support for \fBdns-proxy-tor\fP. ControlPort must be set when using \fBTransPort\fP. If you're planning to use Tor as a transparent proxy for a network, you'll want to examine and change VirtualAddrNetwork from the default setting. You'll also want to set the TransListenAddress option for the network you'd like to proxy. .LP .TP \fBTransListenAddress\fP \fR\fIAddress\fB/\fIbits\fP Optionally listen on \fR\fIAddress\fB/\fIbits\fP as a transparent proxy server. This is useful for exporting a transparent proxy server to an entire network. .LP .TP \fBNatdPort\fP \fR\fIPORT\fP This option allows users of ipfw (FreeBSD, etc) to send connections through tor in a manner similar to the TransPort. This option is only for people who cannot use TransPort. .LP .TP .SH SERVER OPTIONS .PP The following options are useful only for servers (that is, if \fBORPort\fP is non-zero): Loading Loading
doc/tor.1.in +31 −3 Original line number Diff line number Diff line Loading @@ -89,11 +89,11 @@ Windows since that platform lacks getrlimit(). (Default: 1000) .TP \fBControlPort \fR\fIPort\fP If set, Tor will accept connections on this port, and allow those connections to control the Tor process using the this port (Usually: 9051), and allow those connections to control the Tor process using the Tor Control Protocol (described in control-spec.txt). Note: unless you also specify one of \fBHashedControlPassword\fP or \fBCookieAuthentication\fP, setting this option will cause Tor to allow any process on the local host to control it. control it. This option is required if you would like to use Tor with \fBdns-proxy-tor\fP. .LP .TP \fBControlListenAddress \fR\fIIP\fR[:\fIPORT\fR]\fP Loading Loading @@ -526,6 +526,13 @@ leaking DNS requests. When a controller asks for a virtual (unused) address with the 'MAPADDRESS' command, Tor picks an unassigned address from this range. (Default: 127.192.0.0/10) When using \fBdns-proxy-tor\fP to answer queries over a network you'll want to change this address to "10.192.0.0/10" or "172.16.0.0/12". The default \fBVirtualAddrNetwork \fR\fIAddress\fB address range on a properly configured machine will route to the loopback interface. For local use \fBdns-proxy-tor\fP doesn't require a change to the default \fBVirtualAddrNetwork \fR\fIAddress\fB setting. .LP .TP \fBAllowNonRFC953Hostnames \fR\fB0\fR|\fB1\fR\fP Loading @@ -542,7 +549,28 @@ safe since we have already used TLS to authenticate the server and to establish forward-secure keys. Turning this option off makes circuit building slower. (Default: 1) .LP .TP \fBTransPort\fP \fR\fIPORT\fP Enable transparent proxy support on \fR\fIPORT\fP (Usually: 9040). This is required to enable support for \fBdns-proxy-tor\fP. ControlPort must be set when using \fBTransPort\fP. If you're planning to use Tor as a transparent proxy for a network, you'll want to examine and change VirtualAddrNetwork from the default setting. You'll also want to set the TransListenAddress option for the network you'd like to proxy. .LP .TP \fBTransListenAddress\fP \fR\fIAddress\fB/\fIbits\fP Optionally listen on \fR\fIAddress\fB/\fIbits\fP as a transparent proxy server. This is useful for exporting a transparent proxy server to an entire network. .LP .TP \fBNatdPort\fP \fR\fIPORT\fP This option allows users of ipfw (FreeBSD, etc) to send connections through tor in a manner similar to the TransPort. This option is only for people who cannot use TransPort. .LP .TP .SH SERVER OPTIONS .PP The following options are useful only for servers (that is, if \fBORPort\fP is non-zero): Loading
