ganeti.md

[Ganeti](http://ganeti.org/) is software designed to facilitate the management of
virtual machines (KVM or Xen). It helps you move virtual machine
instances from one node to another, create an instance with DRBD
replication on another node and do the live migration from one to
another, etc.

[[_TOC_]]

# Tutorial

## Listing virtual machines (instances)

This will show the running guests, known as "instances":

    gnt-instance list

## Accessing serial console

Our instances do serial console, starting in grub.  To access it, run

    gnt-instance console test01.torproject.org

To exit, use `^]` -- that is, Control-<Closing Bracket>.

# How-to

## Glossary

In Ganeti, a physical machine is called a *node* and a virtual machine
is an *instance*. A node is elected to be the *master* where all
commands should be ran from. Nodes are interconnected through a
private network that is used to communicate commands and synchronise
disks (with [howto/drbd](howto/drbd)). Instances are normally assigned two nodes: a
*primary* and a *secondary*: the *primary* is where the virtual
machine actually runs and th *secondary* acts as a hot failover.

See also the more extensive [glossary in the Ganeti documentation](http://docs.ganeti.org/ganeti/2.15/html/glossary.html).

## Adding a new instance

This command creates a new guest, or "instance" in Ganeti's
vocabulary with 10G root, 2G swap, 20G spare on SSD, 800G on HDD, 8GB
ram and 2 CPU cores:

    gnt-instance add \
      -o debootstrap+buster \
      -t drbd --no-wait-for-sync \
      --net 0:ip=pool,network=gnt-fsn13-02 \
      --no-ip-check \
      --no-name-check \
      --disk 0:size=10G \
      --disk 1:size=2G,name=swap \
      --disk 2:size=20G \
      --disk 3:size=800G,vg=vg_ganeti_hdd \
      --backend-parameters memory=8g,vcpus=2 \
      test-01.torproject.org

### What that does

This configures the following:

 * redundant disks in a DRBD mirror, use `-t plain` instead of `-t drbd` for
   tests as that avoids syncing of disks and will speed things up considerably
   (even with `--no-wait-for-sync` there are some operations that block on
   synced mirrors).  Only one node should be provided as the argument for
   `--node` then.
 * three partitions: one on the default VG (SSD), one on another (HDD)
   and a swap file on the default VG, if you don't specify a swap device,
   a 512MB swapfile is created in `/swapfile`. TODO: configure disk 2
   and 3 automatically in installer. (`/var` and `/srv`?)
 * 8GB of RAM with 2 virtual CPUs
 * an IP allocated from the public gnt-fsn pool:
   `gnt-instance add` will print the IPv4 address it picked to stdout.  The
   IPv6 address can be found in `/var/log/ganeti/os/` on the primary node
   of the instance, see below.
 * with the `test-01.torproject.org` hostname

### Next steps

To find the root password, ssh host key fingerprints, and the IPv6
address, run this **on the node where the instance was created**, for
example:

    egrep 'root password|configured eth0 with|SHA256' $(ls -tr /var/log/ganeti/os/* | tail -1) | grep -v $(hostname)

We copy root's authorized keys into the new instance, so you should be able to
log in with your token.  You will be required to change the root password immediately.
Pick something nice and document it in `tor-passwords`.

Also set reverse DNS for both IPv4 and IPv6 in [hetzner's robot](https://robot.your-server.de/)
(Chek under servers -> vSwitch -> IPs) or in our own reverse zone
files (if delegated).

Then follow [howto/new-machine](howto/new-machine).

### Known issues

 * **usrmerge**: that procedure creates a machine with usrmerge! See
   [bug 34115](https://bugs.torproject.org/34115) before proceeding.

 * **allocator failures**: Note that you may need to use the `--node`
   parameter to pick on which machines you want the machine to end up,
   otherwise Ganeti will choose for you (and may fail). Use, for
   example, `--node fsn-node-01:fsn-node-02` to use `node-01` as
   primary and `node-02` as secondary. The allocator can sometimes
   fail if the allocator is upset about something in the cluster, for
   example:
    
        Can's find primary node using iallocator hail: Request failed: No valid allocation solutions, failure reasons: FailMem: 2, FailN1: 2

   This situation is covered by [ticket 33785](https://bugs.torproject.org/33785). If this problem
   occurs, it might be worth [rebalancing the cluster](#rebalancing-a-cluster).

 * **ping failure**: there is a bug in `ganeti-instance-debootstrap`
   which misconfigures `ping` (among other things), see [bug
   31781](https://bugs.torproject.org/31781). It's currently patched in our version of the Debian
   package, but that patch might disappear if Debian upgrade the
   package without [shipping our patch](https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=944538).


### Other examples

This is the same without the HDD partition, in the `gnt-chi` cluster:

    gnt-instance add \
      -o debootstrap+buster \
      -t drbd --no-wait-for-sync \
      --net 0:ip=pool,network=gnt-chi-01 \
      --no-ip-check \
      --no-name-check \
      --disk 0:size=10G \
      --disk 1:size=2G,name=swap \
      --disk 2:size=20G \
      --backend-parameters memory=8g,vcpus=2 \
      test-01.torproject.org

A simple test machine, with only 1G of disk, ram, and 1 CPU, without
DRBD, in the FSN cluster:

    gnt-instance add \
          -o debootstrap+buster \
          -t plain --no-wait-for-sync \
          --net 0:ip=pool,network=gnt-fsn13-02 \
          --no-ip-check \
          --no-name-check \
          --disk 0:size=10G \
          --disk 1:size=2G,name=swap \
          --backend-parameters memory=1g,vcpus=1 \
          test-01.torproject.org

## Modifying an instance

### CPU, memory changes

It's possible to change the IP, CPU, or memory allocation of an instance
using the [gnt-instance modify](http://docs.ganeti.org/ganeti/2.15/man/gnt-instance.html#modify) command:

    gnt-instance modify -B vcpus=2 test1.torproject.org
    gnt-instance modify -B memory=4g test1.torproject.org
    gnt-instance reboot test1.torproject.org

### IP address change

IP address changes require a full stop and will require manual changes
to the `/etc/network/interfaces*` files:

    gnt-instance modify --net 0:modify,ip=116.202.120.175 test1.torproject.org
    gnt-instance stop test1.torproject.org
    gnt-instance start test1.torproject.org
    gnt-instance console test1.torproject.org

### Resizing disks

The [gnt-instance grow-disk](http://docs.ganeti.org/ganeti/2.15/man/gnt-instance.html#grow-disk) command can be used to change the size
of the underlying device:

    gnt-instance grow-disk --absolute test1.torproject.org 0 16g
    gnt-instance reboot test1.torproject.org

The number `0` in this context, indicates the first disk of the
instance.  The amount specified is the final disk size (because of the
`--absolute` flag). In the above example, the final disk size will be
16GB. To *add* space to the existing disk, remove the `--absolute`
flag:

    gnt-instance grow-disk test1.torproject.org 0 16g
    gnt-instance reboot test1.torproject.org

In the above example, 16GB will be **ADDED** to the disk. Be careful
with resizes, because it's not possible to revert such a change:
`grow-disk` does support shrinking disks. The only way to revert the
change is by exporting / importing the instance.

Then the filesystem needs to be resized inside the VM:

    ssh root@test1.torproject.org 

#### Resizing under LVM

Use `pvs` to display information about the physical volumes:

    root@cupani:~# pvs
    PV         VG        Fmt  Attr PSize   PFree   
    /dev/sdc   vg_test   lvm2 a--  <8.00g  1020.00m

Resize the physical volume to take up the new space:

    pvresize /dev/sdc

Use `lvs` to display information about logical volumes:

    # lvs
    LV            VG               Attr       LSize    Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
    var-opt       vg_test-01     -wi-ao---- <10.00g                                                    
    test-backup vg_test-01_hdd   -wi-ao---- <20.00g            

Use lvextend to add space to the volume:

    lvextend -l '+100%FREE' vg_test-01/var-opt

Finally resize the filesystem:

    resize2fs /dev/vg_test-01/var-opt

See also the [LVM howto](howto/lvm).

#### Resizing without LVM

If there's no LVM inside the VM (a more common configuration
nowadays), the above procedure will obviously not work.

You might need to resize the partition manually, which can be done
using fdisk. In the following example we have a `sda1` partition that
we want to extend from 10G to 20G to fill up the free space on
`/dev/sda`. Here is what the partition layout looks like before the resize:

```
# lsblk -a
NAME   MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
fd0      2:0    1   4K  0 disk 
sda      8:0    0  20G  0 disk 
└─sda1   8:1    0  10G  0 part /
sdb      8:16   0   2G  0 disk [SWAP]
sdc      8:32   0  40G  0 disk /srv

```

We use fdisk on the device:

```
# fdisk /dev/sda

Welcome to fdisk (util-linux 2.33.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.


Command (m for help): p # prints the partition table
Disk /dev/sda: 20 GiB, 21474836480 bytes, 41943040 sectors
Disk model: QEMU HARDDISK   
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x73ab5f76

Device     Boot Start      End  Sectors Size Id Type
/dev/sda1  *     2048 20971519 20969472  10G 83 Linux # note the starting sector for later

```

Now we delete the partition. Note that the data will not be deleted, only the partition table will be altered:

```
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.

Command (m for help): p
Disk /dev/sda: 20 GiB, 21474836480 bytes, 41943040 sectors
Disk model: QEMU HARDDISK   
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x73ab5f76
```

Now we create the new partition to take up the whole space:

```
Command (m for help): n
Partition type
   p   primary (0 primary, 0 extended, 4 free)
   e   extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-41943039, default 2048): 2048 # this is the starting sector from above.
Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-41943039, default 41943039): 41943039

Created a new partition 1 of type 'Linux' and of size 20 GiB.
Partition #1 contains a ext4 signature.

Do you want to remove the signature? [Y]es/[N]o: n # we want to keep the previous signature

Command (m for help): p

Disk /dev/sda: 20 GiB, 21474836480 bytes, 41943040 sectors
Disk model: QEMU HARDDISK   
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x73ab5f76

Device     Boot Start      End  Sectors Size Id Type
/dev/sda1        2048 41943039 41940992  20G 83 Linux

Command (m for help): w
The partition table has been altered.
Syncing disks.
```

Now we check the partitions:

```
# lsblk -a
NAME   MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
fd0      2:0    1   4K  0 disk 
sda      8:0    0  20G  0 disk 
└─sda1   8:1    0  20G  0 part /
sdb      8:16   0   2G  0 disk [SWAP]
sdc      8:32   0  40G  0 disk /srv
```

If we check the free disk space on the device we will notice it has not changed  yet:
```
# df -h /
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda1       9.8G  8.5G  874M  91% /
```

We need to resize it:

```
# resize2fs /dev/sda1
resize2fs 1.44.5 (15-Dec-2018)
Filesystem at /dev/sda1 is mounted on /; on-line resizing required
old_desc_blocks = 2, new_desc_blocks = 3
The filesystem on /dev/sda1 is now 5242624 (4k) blocks long.
```

The resize is now complete.

### Adding disks

A disk can be added to an instance with the `modify` command as
well. This, for example, will add a 100GB disk to the `test1` instance
on teh `vg_ganeti_hdd` volume group, which is "slow" rotating disks:

    gnt-instance modify --disk add:size=100g,vg=vg_ganeti_hdd test1.torproject.org
    gnt-instance reboot test1.torproject.org

### Adding a network interface on the rfc1918 vlan

We have a vlan that some VMs that do not have public addresses sit on.
Its vlanid is 4002 and its backed by Hetzner vswitch vSwitch #11973 "fsn-gnt-rfc1918-traffic".
Note that traffic on this vlan will travel in the clear between nodes.

To add an instance to this vlan, give it a second network interface using

    gnt-instance modify --net add:link=br0,vlan=4002,mode=openvswitch test1.torproject.org

## Destroying an instance

This totally deletes the instance, including all mirrors and
everything, be very careful with it:

    gnt-instance remove test01.torproject.org

## Getting information

Information about an instances can be found in the rather verbose
`gnt-instance info`:

    root@fsn-node-01:~# gnt-instance info tb-build-02.torproject.org
    - Instance name: tb-build-02.torproject.org
      UUID: 8e9f3ca6-204f-4b6c-8e3e-6a8fda137c9b
      Serial number: 5
      Creation time: 2020-12-15 14:06:41
      Modification time: 2020-12-15 14:07:31
      State: configured to be up, actual state is up
      Nodes: 
        - primary: fsn-node-03.torproject.org
          group: default (UUID 8c32fd09-dc4c-4237-9dd2-3da3dfd3189e)
        - secondaries: fsn-node-04.torproject.org (group default, group UUID 8c32fd09-dc4c-4237-9dd2-3da3dfd3189e)
      Operating system: debootstrap+buster

A quick command that can be done is this, which shows the
primary/secondary for a given instance:

    gnt-instance info tb-build-02.torproject.org | grep -A 3 Nodes

An equivalent command will show the primary and secondary for *all*
instances, on top of extra information (like the CPU count, memory and
disk usage):

    gnt-instance list -o pnode,snodes,name,be/vcpus,be/memory,disk_usage,disk_template,status | sort

It can be useful to run this in a loop to see changes:

    watch -n5 -d 'gnt-instance list -o pnode,snodes,name,be/vcpus,be/memory,disk_usage,disk_template,status | sort'

## Disk operations (DRBD)

Instances should be setup using the DRBD backend, in which case you
should probably take a look at [howto/drbd](howto/drbd) if you have problems with
that. Ganeti handles most of the logic there so that should generally
not be necessary.

## Evaluating cluster capacity

This will list instances repeatedly, but also show their assigned
memory, and compare it with the node's capacity:

    gnt-instance list -o pnode,name,be/vcpus,be/memory,disk_usage,disk_template,status | sort &&
    echo &&
    gnt-node list

The latter does not show disk usage for secondary volume groups (see
[upstream issue 1379](https://github.com/ganeti/ganeti/issues/1379)), for a complete picture of disk usage, use:

    gnt-node list-storage

The [gnt-cluster verify](http://docs.ganeti.org/ganeti/2.15/man/gnt-cluster.html#verify) command will also check to see if there's
enough space on secondaries to account for the failure of a
node. Healthy output looks like this:

    root@fsn-node-01:~# gnt-cluster verify
    Submitted jobs 48030, 48031
    Waiting for job 48030 ...
    Fri Jan 17 20:05:42 2020 * Verifying cluster config
    Fri Jan 17 20:05:42 2020 * Verifying cluster certificate files
    Fri Jan 17 20:05:42 2020 * Verifying hypervisor parameters
    Fri Jan 17 20:05:42 2020 * Verifying all nodes belong to an existing group
    Waiting for job 48031 ...
    Fri Jan 17 20:05:42 2020 * Verifying group 'default'
    Fri Jan 17 20:05:42 2020 * Gathering data (2 nodes)
    Fri Jan 17 20:05:42 2020 * Gathering information about nodes (2 nodes)
    Fri Jan 17 20:05:45 2020 * Gathering disk information (2 nodes)
    Fri Jan 17 20:05:45 2020 * Verifying configuration file consistency
    Fri Jan 17 20:05:45 2020 * Verifying node status
    Fri Jan 17 20:05:45 2020 * Verifying instance status
    Fri Jan 17 20:05:45 2020 * Verifying orphan volumes
    Fri Jan 17 20:05:45 2020 * Verifying N+1 Memory redundancy
    Fri Jan 17 20:05:45 2020 * Other Notes
    Fri Jan 17 20:05:45 2020 * Hooks Results

A sick node would have said something like this instead:

    Mon Oct 26 18:59:37 2009 * Verifying N+1 Memory redundancy
    Mon Oct 26 18:59:37 2009   - ERROR: node node2: not enough memory to accommodate instance failovers should node node1 fail

See the [ganeti manual](http://docs.ganeti.org/ganeti/2.15/html/walkthrough.html#n-1-errors) for a more extensive example

Also note the `hspace -L` command, which can tell you how many
instances can be created in a given cluster. It uses the "standard"
instance template defined in the cluster (which we haven't configured
yet).

## Moving instances and failover

Ganeti is smart about assigning instances to nodes. There's also a
command (`hbal`) to automatically rebalance the cluster (see
below). If for some reason hbal doesn’t do what you want or you need
to move things around for other reasons, here are a few commands that
might be handy.

Make an instance switch to using it's secondary:

    gnt-instance migrate test1.torproject.org

Make all instances on a node switch to their secondaries:

    gnt-node migrate test1.torproject.org

The `migrate` commands does a "live" migrate which should avoid any
downtime during the migration. It might be preferable to actually
shutdown the machine for some reason (for example if we actually want
to reboot because of a security upgrade). Or we might not be able to
live-migrate because the node is down. In this case, we do a
[failover](http://docs.ganeti.org/ganeti/2.15/html/admin.html#failing-over-an-instance)

    gnt-instance failover test1.torproject.org

The [gnt-node evacuate](http://docs.ganeti.org/ganeti/2.15/man/gnt-node.html#evacuate) command can also be used to "empty" a given
node altogether, in case of an emergency:

    gnt-node evacuate -I . fsn-node-02.torproject.org

Similarly, the [gnt-node failover](http://docs.ganeti.org/ganeti/2.15/man/gnt-node.html#failover) command can be used to
hard-recover from a completely crashed node:

    gnt-node failover fsn-node-02.torproject.org

Note that you might need the `--ignore-consistency` flag if the
node is unresponsive.

## Importing external libvirt instances

Assumptions:

 * `INSTANCE`: name of the instance being migrated, the "old" one
   being outside the cluster and the "new" one being the one created
   inside the cluster (e.g. `chiwui.torproject.org`)
 * `SPARE_NODE`: a ganeti node with free space
   (e.g. `fsn-node-03.torproject.org`) where the `INSTANCE` will be
   migrated
 * `MASTER_NODE`: the master ganeti node
   (e.g. `fsn-node-01.torproject.org`)
 * `KVM_HOST`: the machine which we migrate the `INSTANCE` from
 * the `INSTANCE` has only `root` and `swap` partitions
 * the `SPARE_NODE` has space in `/srv/` to host all the virtual
   machines to import, to check, use:

        fab -H crm-ext-01.torproject.org,crm-int-01.torproject.org,forrestii.torproject.org,nevii.torproject.org,rude.torproject.org,troodi.torproject.org,vineale.torproject.org libvirt.du -p kvm3.torproject.org | sed '/-swap$/d;s/ .*$//' <f | awk '{s+=$1} END {print s}'

   You will very likely need to create a `/srv` big enough for this,
   for example:

        lvcreate -L 300G vg_ganeti -n srv-tmp &&
        mkfs /dev/vg_ganeti/srv-tmp &&
        mount /dev/vg_ganeti/srv-tmp /srv

Import procedure:

 1. pick a viable SPARE NODE to import the INSTANCE (see "evaluating
    cluster capacity" above, when in doubt) and find on which KVM HOST
    the INSTANCE lives

 2. copy the disks, without downtime:
 
        ./ganeti -v -H $INSTANCE libvirt-import  --ganeti-node $SPARE_NODE --libvirt-host $KVM_HOST

 3. copy the disks again, this time suspending the machine:

        ./ganeti -v -H $INSTANCE libvirt-import  --ganeti-node $SPARE_NODE --libvirt-host $KVM_HOST --suspend --adopt

 4. renumber the host:
    
        ./ganeti -v -H $INSTANCE renumber-instance --ganeti-node $SPARE_NODE

 5. test services by changing your `/etc/hosts`, possibly warning
    service admins:

    > Subject: $INSTANCE IP address change planned for Ganeti migration
    >
    > I will soon migrate this virtual machine to the new ganeti cluster. this
    > will involve an IP address change which might affect the service.
    >
    > Please let me know if there are any problems you can think of. in
    > particular, do let me know if any internal (inside the server) or external
    > (outside the server) services hardcodes the IP address of the virtual
    > machine.
    >
    > A test instance has been setup. You can test the service by
    > adding the following to your /etc/hosts:
    >
    >     116.202.120.182 $INSTANCE
    >     2a01:4f8:fff0:4f:266:37ff:fe32:cfb2 $INSTANCE

 6. destroy test instance:
 
        gnt-instance remove $INSTANCE
 
 7. lower TTLs to 5 minutes. this procedure varies a lot according to
    the service, but generally if all DNS entries are `CNAME`s
    pointing to the main machine domain name, the TTL can be lowered
    by adding a `dnsTTL` entry in the LDAP entry for this host. For
    example, this sets the TTL to 5 minutes:
    
        dnsTTL: 300

    Then to make the changes immediate, you need the following
    commands:
    
        ssh root@alberti.torproject.org sudo -u sshdist ud-generate &&
        ssh root@nevii.torproject.org ud-replicate
 
    Warning: if you migrate one of the hosts ud-ldap depends on, this
    can fail and not only the TTL will not update, but it might also
    fail to update the IP address in the below procedure. See [ticket
    33766](https://bugs.torproject.org/33766) for
    details.
 
 8. shutdown original instance and redo migration as in step 3 and 4:
 
        fab -H $INSTANCE reboot.halt-and-wait --delay-shutdown 60 --reason='migrating to new server' &&
        ./ganeti -v -H $INSTANCE libvirt-import  --ganeti-node $SPARE_NODE --libvirt-host $KVM_HOST --adopt &&
        ./ganeti -v -H $INSTANCE renumber-instance --ganeti-node $SPARE_NODE

 9. final test procedure

    TODO: establish host-level test procedure and run it here.

 10. switch to DRBD, still on the Ganeti MASTER NODE:

         gnt-instance stop $INSTANCE &&
         gnt-instance modify -t drbd $INSTANCE &&
         gnt-instance failover -f $INSTANCE &&
         gnt-instance start $INSTANCE

    The above can sometimes fail if the allocator is upset about
    something in the cluster, for example:
    
        Can's find secondary node using iallocator hail: Request failed: No valid allocation solutions, failure reasons: FailMem: 2, FailN1: 2

    This situation is covered by [ticket 33785](https://bugs.torproject.org/33785). To work around the
    allocator, you can specify a secondary node directly:
    
        gnt-instance modify -t drbd -n fsn-node-04.torproject.org $INSTANCE &&
        gnt-instance failover -f $INSTANCE &&
        gnt-instance start $INSTANCE

    TODO: move into fabric, maybe in a `libvirt-import-live` or
    `post-libvirt-import` job that would also do the renumbering below

 11. change IP address in the following locations:

     * LDAP (`ipHostNumber` field, but also change the `physicalHost` and `l` fields!).  Also drop the dnsTTL attribute while you're at it.
     * Puppet (grep in tor-puppet source, run `puppet agent -t; ud-replicate` on pauli)
     * DNS (grep in tor-dns source, `puppet agent -t; ud-replicate` on nevii)
     * nagios (don't forget to change the parent)
     * reverse DNS (upstream web UI, e.g. Hetzner Robot)
     * grep for the host's IP address on itself:

            grep -r -e 78.47.38.227  -e 2a01:4f8:fff0:4f:266:37ff:fe77:1ad8 /etc
            grep -r -e 78.47.38.227  -e 2a01:4f8:fff0:4f:266:37ff:fe77:1ad8 /srv

     * grep for the host's IP on *all* hosts:

            cumin-all-puppet
            cumin-all 'grep -r -e 78.47.38.227  -e 2a01:4f8:fff0:4f:266:37ff:fe77:1ad8 /etc'

    TODO: move those jobs into fabric

 12. retire old instance (only a tiny part of [howto/retire-a-host](howto/retire-a-host)):
 
        ./retire -H $INSTANCE retire-instance --parent-host $KVM_HOST

 12. update the [Nextcloud spreadsheet](https://nc.torproject.net/apps/onlyoffice/5395) to remove the machine from
     the KVM host

 13. warn users about the migration, for example:
 
> To: tor-project@lists.torproject.org
> Subject: cupani AKA git-rw IP address changed
> 
> The main git server, cupani, is the machine you connect to when you push
> or pull git repositories over ssh to git-rw.torproject.org. That
> machines has been migrated to the new Ganeti cluster.
> 
> This required an IP address change from:
> 
>     78.47.38.228 2a01:4f8:211:6e8:0:823:4:1
> 
> to:
> 
>     116.202.120.182 2a01:4f8:fff0:4f:266:37ff:fe32:cfb2
> 
> DNS has been updated and preliminary tests show that everything is
> mostly working. You *will* get a warning about the IP address change
> when connecting over SSH, which will go away after the first
> connection. 
>
>     Warning: Permanently added the ED25519 host key for IP address '116.202.120.182' to the list of known hosts.
>
> That is normal. The SSH fingerprints of the host did *not* change.
> 
> Please do report any other anomaly using the normal channels:
> 
> https://gitlab.torproject.org/anarcat/wikitest/-/wikis/doc/how-to-get-help/
> 
> The service was unavailable for about an hour during the migration.

## Importing external libvirt instances, manual

This procedure is now easier to accomplish with the Fabric tools
written especially for this purpose. Use the above procedure
instead. This is kept for historical reference.

Assumptions:

 * `INSTANCE`: name of the instance being migrated, the "old" one
   being outside the cluster and the "new" one being the one created
   inside the cluster (e.g. `chiwui.torproject.org`)
 * `SPARE_NODE`: a ganeti node with free space
   (e.g. `fsn-node-03.torproject.org`) where the `INSTANCE` will be
   migrated
 * `MASTER_NODE`: the master ganeti node
   (e.g. `fsn-node-01.torproject.org`)
 * `KVM_HOST`: the machine which we migrate the `INSTANCE` from
 * the `INSTANCE` has only `root` and `swap` partitions

Import procedure:

 1. pick a viable SPARE NODE to import the instance (see "evaluating
    cluster capacity" above, when in doubt), login to the three
    servers, setting the proper environment everywhere, for example:
    
        MASTER_NODE=fsn-node-01.torproject.org
        SPARE_NODE=fsn-node-03.torproject.org
        KVM_HOST=kvm1.torproject.org
        INSTANCE=test.torproject.org

 2. establish VM specs, on the KVM HOST:
 
    * disk space in GiB:
    
          for disk in /srv/vmstore/$INSTANCE/*; do
              printf "$disk: "
              echo "$(qemu-img info --output=json $disk | jq '."virtual-size"') / 1024 / 1024 / 1024" | bc -l
          done

    * number of CPU cores:

          sed -n '/<vcpu/{s/[^>]*>//;s/<.*//;p}' < /etc/libvirt/qemu/$INSTANCE.xml

    * memory, assuming from KiB to GiB:

          echo "$(sed -n '/<memory/{s/[^>]*>//;s/<.*//;p}' < /etc/libvirt/qemu/$INSTANCE.xml) /1024 /1024" | bc -l

      TODO: make sure the memory line is in KiB and that the number
      makes sense.

    * on the INSTANCE, find the swap device UUID so we can recreate it later:

          blkid -t TYPE=swap -s UUID -o value

 3. setup a copy channel, on the SPARE NODE:
 
        ssh-agent bash
        ssh-add /etc/ssh/ssh_host_ed25519_key
        cat /etc/ssh/ssh_host_ed25519_key.pub

    on the KVM HOST:
    
        echo "$KEY_FROM_SPARE_NODE" >> /etc/ssh/userkeys/root

 4. copy the `.qcow` file(s) over, from the KVM HOST to the SPARE NODE:
 
        rsync -P $KVM_HOST:/srv/vmstore/$INSTANCE/$INSTANCE-root /srv/
        rsync -P $KVM_HOST:/srv/vmstore/$INSTANCE/$INSTANCE-lvm /srv/ || true

    Note: it's possible there is not enough room in `/srv`: in the
    base Ganeti installs, everything is in the same root partition
    (`/`) which will fill up if the instance is (say) over ~30GiB. In
    that case, create a filesystem in `/srv`:

        (mkdir /root/srv && mv /srv/* /root/srv true) || true &&
        lvcreate -L 200G vg_ganeti -n srv &&
        mkfs /dev/vg_ganeti/srv &&
        echo "/dev/vg_ganeti/srv /srv ext4 rw,noatime,errors=remount-ro 0 2" >> /etc/fstab &&
        mount /srv &&
        ( mv /root/srv/* ; rmdir /root/srv )

    This partition can be reclaimed once the VM migrations are
    completed, as it needlessly takes up space on the node.

 5. on the SPARE NODE, create and initialize a logical volume with the predetermined size:
 
        lvcreate -L 4GiB -n $INSTANCE-swap vg_ganeti
        mkswap --uuid $SWAP_UUID /dev/vg_ganeti/$INSTANCE-swap
        lvcreate -L 20GiB -n $INSTANCE-root vg_ganeti
        qemu-img convert /srv/$INSTANCE-root  -O raw /dev/vg_ganeti/$INSTANCE-root
        lvcreate -L 40GiB -n $INSTANCE-lvm vg_ganeti_hdd
        qemu-img convert /srv/$INSTANCE-lvm  -O raw /dev/vg_ganeti_hdd/$INSTANCE-lvm

    Note how we assume two disks above, but the instance might have a
    different configuration that would require changing the above. The
    above, common, configuration is to have an LVM disk separate from
    the "root" disk, the former being on a HDD, but the HDD is
    sometimes completely omitted and sizes can differ.
    
    Sometimes it might be worth using pv to get progress on long
    transfers:
    
        qemu-img convert /srv/$INSTANCE-lvm -O raw /srv/$INSTANCE-lvm.raw
        pv /srv/$INSTANCE-lvm.raw | dd of=/dev/vg_ganeti_hdd/$INSTANCE-lvm bs=4k

    TODO: ideally, the above procedure (and many steps below as well)
    would be automatically deduced from the disk listing established
    in the first step.

 6. on the MASTER NODE, create the instance, adopting the LV:
 
        gnt-instance add -t plain \
            -n fsn-node-03 \
            --disk 0:adopt=$INSTANCE-root \
            --disk 1:adopt=$INSTANCE-swap \
            --disk 2:adopt=$INSTANCE-lvm,vg=vg_ganeti_hdd \
            --backend-parameters memory=2g,vcpus=2 \
            --net 0:ip=pool,network=gnt-fsn \
            --no-name-check \
            --no-ip-check \
            -o debootstrap+default \
            $INSTANCE

 7. cross your fingers and watch the party:
 
        gnt-instance console $INSTANCE

 9. IP address change on new instance:
 
      edit `/etc/hosts` and `/etc/network/interfaces` by hand and add
      IPv4 and IPv6 ip. IPv4 configuration can be found in:
      
          gnt-instance show $INSTANCE
          
      Latter can be guessed by concatenating `2a01:4f8:fff0:4f::` and
      the IPv6 local local address without `fe80::`. For example: a
      link local address of `fe80::266:37ff:fe65:870f/64` should yield
      the following configuration:
      
          iface eth0 inet6 static
              accept_ra 0
              address 2a01:4f8:fff0:4f:266:37ff:fe65:870f/64
              gateway 2a01:4f8:fff0:4f::1

      TODO: reuse `gnt-debian-interfaces` from the ganeti puppet
      module script here?

 10. functional tests: change your `/etc/hosts` to point to the new
     server and see if everything still kind of works

 11. shutdown original instance

 12. resync and reconvert image, on the Ganeti MASTER NODE:
 
         gnt-instance stop $INSTANCE

     on the Ganeti node:

         rsync -P $KVM_HOST:/srv/vmstore/$INSTANCE/$INSTANCE-root /srv/ &&
         qemu-img convert /srv/$INSTANCE-root  -O raw /dev/vg_ganeti/$INSTANCE-root &&
         rsync -P $KVM_HOST:/srv/vmstore/$INSTANCE/$INSTANCE-lvm /srv/ &&
         qemu-img convert /srv/$INSTANCE-lvm  -O raw /dev/vg_ganeti_hdd/$INSTANCE-lvm

 13. switch to DRBD, still on the Ganeti MASTER NODE:

         gnt-instance modify -t drbd $INSTANCE
         gnt-instance failover $INSTANCE
         gnt-instance startup $INSTANCE

 14. redo IP adress change in `/etc/network/interfaces` and `/etc/hosts`

 15. final functional test

 16. change IP address in the following locations:

     * nagios (don't forget to change the parent)
     * LDAP (`ipHostNumber` field, but also change the `physicalHost` and `l` fields!)
     * Puppet (grep in tor-puppet source, run `puppet agent -t; ud-replicate` on pauli)
     * DNS (grep in tor-dns source, `puppet agent -t; ud-replicate` on nevii)
     * reverse DNS (upstream web UI, e.g. Hetzner Robot)

 17. decomission old instance ([howto/retire-a-host](howto/retire-a-host))

### Troubleshooting

 * if boot takes a long time and you see a message like this on the console:
 
        [  *** ] A start job is running for dev-disk-by\x2duuid-484b5...26s / 1min 30s)

   ... which is generally followed by:
   
        [DEPEND] Dependency failed for /dev/disk/by-…6f4b5-f334-4173-8491-9353d4f94e04.
        [DEPEND] Dependency failed for Swap.

   it means the swap device UUID wasn't setup properly, and does not
   match the one provided in `/etc/fstab`. That is probably because
   you missed the `mkswap -U` step documented above.

### References

 * [Upstream docs](http://docs.ganeti.org/ganeti/2.15/html/admin.html#import-of-foreign-instances) have the canonical incantation:

        gnt-instance add -t plain -n HOME_NODE ... --disk 0:adopt=lv_name[,vg=vg_name] INSTANCE_NAME

 * [DSA docs](https://dsa.debian.org/howto/install-ganeti/) also use disk adoption and have a procedure to
   migrate to DRBD

 * [Riseup docs](https://we.riseup.net/riseup+tech/ganeti#move-an-instance-from-one-cluster-to-another-from-) suggest creating a VM without installing, shutting
   down and then syncing

Ganeti [supports importing and exporting](http://docs.ganeti.org/ganeti/2.15/html/design-ovf-support.html?highlight=qcow) from the [Open
Virtualization Format](https://en.wikipedia.org/wiki/Open_Virtualization_Format) (OVF), but unfortunately it [doesn't seem
libvirt supports *exporting* to OVF](https://forums.centos.org/viewtopic.php?t=49231). There's a [virt-convert](http://manpages.debian.org/virt-convert)
tool which can *import* OVF, but not the reverse. The [libguestfs](http://www.libguestfs.org/)
library also has a [converter](http://www.libguestfs.org/virt-v2v.1.html) but it also doesn't support
exporting to OVF or anything Ganeti can load directly.

So people have written [their own conversion tools](https://virtuallyhyper.com/2013/06/migrate-from-libvirt-kvm-to-virtualbox/) or [their own
conversion procedure](https://scienceofficersblog.blogspot.com/2014/04/using-cloud-images-with-ganeti.html).

Ganeti also supports [file-backed instances](http://docs.ganeti.org/ganeti/2.15/html/design-file-based-storage.html) but "adoption" is
specifically designed for logical volumes, so it doesn't work for our
use case.

## Rebooting

Those hosts need special care, as we can accomplish zero-downtime
reboots on those machines. The `reboot` script in `tsa-misc` takes
care of the special steps involved (which is basically to empty a
node before rebooting it).

Such a reboot should be ran interactively, inside a `tmux` or `screen`
session, and takes over 15 minutes to complete right now, but depends
on the size of the cluster (in terms of core memory usage).

Once the reboot is completed, all instances might end up on a single
machine, and the cluster might need to be rebalanced, see
below. (Note: the update script should eventually do that, see [ticket
33406](https://bugs.torproject.org/33406)).

## Rebalancing a cluster

After a reboot or a downtime, all nodes might end up on the same
machine. This is normally handled by the reboot script, but it might
be desirable to do this by hand if there was a crash or another
special condition.

This can be easily corrected with this command, which will spread
instances around the cluster to balance it:

    hbal -L -C -v -X

This will automatically move the instances around and rebalance the
cluster. Here's an example run on a small cluster:

    root@fsn-node-01:~# gnt-instance list
    Instance                          Hypervisor OS                 Primary_node               Status  Memory
    loghost01.torproject.org          kvm        debootstrap+buster fsn-node-02.torproject.org running   2.0G
    onionoo-backend-01.torproject.org kvm        debootstrap+buster fsn-node-02.torproject.org running  12.0G
    static-master-fsn.torproject.org  kvm        debootstrap+buster fsn-node-02.torproject.org running   8.0G
    web-fsn-01.torproject.org         kvm        debootstrap+buster fsn-node-02.torproject.org running   4.0G
    web-fsn-02.torproject.org         kvm        debootstrap+buster fsn-node-02.torproject.org running   4.0G
    root@fsn-node-01:~# hbal -L -X
    Loaded 2 nodes, 5 instances
    Group size 2 nodes, 5 instances
    Selected node group: default
    Initial check done: 0 bad nodes, 0 bad instances.
    Initial score: 8.45007519
    Trying to minimize the CV...
        1. onionoo-backend-01 fsn-node-02:fsn-node-01 => fsn-node-01:fsn-node-02   4.98124611 a=f
        2. loghost01          fsn-node-02:fsn-node-01 => fsn-node-01:fsn-node-02   1.78271883 a=f
    Cluster score improved from 8.45007519 to 1.78271883
    Solution length=2
    Got job IDs 16345
    Got job IDs 16346
    root@fsn-node-01:~# gnt-instance list
    Instance                          Hypervisor OS                 Primary_node               Status  Memory
    loghost01.torproject.org          kvm        debootstrap+buster fsn-node-01.torproject.org running   2.0G
    onionoo-backend-01.torproject.org kvm        debootstrap+buster fsn-node-01.torproject.org running  12.0G
    static-master-fsn.torproject.org  kvm        debootstrap+buster fsn-node-02.torproject.org running   8.0G
    web-fsn-01.torproject.org         kvm        debootstrap+buster fsn-node-02.torproject.org running   4.0G
    web-fsn-02.torproject.org         kvm        debootstrap+buster fsn-node-02.torproject.org running   4.0G

In the above example, you should notice that the `web-fsn` instances both
ended up on the same node. That's because the balancer did not know
that they should be distributed. A special configuration was done,
below, to avoid that problem in the future. But as a workaround,
instances can also be moved by hand and the cluster re-balanced.

Also notice that `-X` does not show the job output, use
`ganeti-watch-jobs` for that, in another terminal. See the [job
inspection](#job-inspection) section for more details on that.

### Redundant instances distribution

Some instances are redundant across the cluster and should *not* end up
on the same node. A good example are the `web-fsn-01` and `web-fsn-02`
instances which, in theory, would serve similar traffic. If they end
up on the same node, it might flood the network on that machine or at
least defeats the purpose of having redundant machines.

The way to ensure they get distributed properly by the balancing
algorithm is to "tag" them. For the web nodes, for example, this was
performed on the master:

    gnt-cluster add-tags htools:iextags:service
    gnt-instance add-tags web-fsn-01.torproject.org service:web-fsn
    gnt-instance add-tags web-fsn-02.torproject.org service:web-fsn

This tells Ganeti that `web-fsn` is an "exclusion tag" and the
optimizer will not try to schedule instances with those tags on the
same node.

To see which tags are present, use: